Packing instruction P002

P002 PACKING INSTRUCTION (SOLIDS) P002 The following packagings are authorized provided that the general provisions of 4.1.1 and 4.1.3 are met: Maximum net mass (see 4.1.3.3) Packing group I Packing group II Packing group III Combination packagings Inner packagings Outer packagings Glass 10 kg Plastics a 50 kg Metal 50 kg Paper a, b, c 50 kg Fibre a, b, c 50 kg Drums steel (1A1, 1A2) aluminium (1B1, 1B2) other metal (1N1, 1N2) plastics (1H1, 1H2) plywood (1D) fibre (1G) Boxes steel (4A) aluminium (4B) other metal (4N) natural wood (4C1) natural wood with sift proof walls (4C2) plywood (4D) reconstituted wood (4F) fibreboard (4G) expanded plastics (4H1) solid plastics (4H2) Jerricans steel (3A1, 3A2) aluminium (3B1, 3B2) plastics (3H1, 3H2) 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 250 kg 250 kg 250 kg 125 kg 125 kg 60 kg 250 kg 120 kg 120 kg 120 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 60 kg 400 kg 120 kg 120 kg 120 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 60 kg 400 kg 120 kg 120 kg 120 kg Single packagings Drums steel (1A1 or 1A2d) aluminium (1B1 or 1B2d) metal, other than steel or aluminium (1N1 or 1N2d) plastics (1H1 or 1H2d) fibre (1G)e plywood (1D)e 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg a These inner packagings shall be siftproof. b These inner packagings shall not be used when the substances being carried may become liquid during carriage (see 4.1.3.4). c These inner packagings shall not be used for substances of packing group I. d These packagings shall not be used for substances of packing group I that may become liquid during carriage (see 4.1.3.4). e These packagings shall not be used when substances being carried may become liquid during carriage (see 4.1.3.4). Cont'd on next page P002 PACKING INSTRUCTION (SOLIDS) (cont'd) P002 Maximum net mass (see 4.1.3.3) Packing group I Packing group II Packing group III Single packagings (cont'd) Jerricans Steel (3A1 or 3A2d) Aluminium (3B1 or 3B2d) plastics (3H1 or 3H2d) Boxes steel (4A)e aluminium (4B)e other metal (4N)e natural wood (4C1)e plywood (4D)e reconstituted wood (4F)e natural wood with sift proof walls (4C2)e fibreboard (4G)e solid plastics (4H2)e Bags bags (5H3, 5H4, 5L3, 5M2)e Composite packagings plastics receptacle with outer steel, aluminium, plywood, fibre or plastics drum (6HA1, 6HB1, 6HG1e , 6HD1e, or 6HH1) plastics receptacle with outer steel or aluminium crate or box, wooden box, plywood box, fibreboard box or solid plastics box (6HA2, 6HB2, 6HC, 6HD2e, 6HG2e or 6HH2) glass receptacle with outer steel, aluminium plywood or fibre drum (6PA1, 6PB1, 6PD1e or 6PG1e) or with outer steel or aluminium crate or box or with outer wooden, or fibreboard box or with outer wickerwork hamper (6PA2, 6PB2, 6PC, 6PD2e, or 6PG2e) or with outer expanded plastics or solid plastics packaging (6PH1 or 6PH2e) 120 kg 120 kg 120 kg Not allowed Not allowed Not allowed Not allowed Not allowed Not allowed Not allowed Not allowed Not allowed Not allowed 400 kg 75 kg 75 kg 120 kg 120 kg 120 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 50 kg 400 kg 75 kg 75 kg 120 kg 120 kg 120 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 400 kg 50 kg 400 kg 75 kg 75 kg Pressure receptacles, provided that the general provisions of 4.1.3.6 are met. Special packing provisions: PP6 (Deleted) PP7 For UN No. 2000, celluloid may also be transported unpacked on pallets, wrapped in plastic film and secured by appropriate means, such as steel bands as a full load in closed vehicles or containers. Each pallet shall not exceed 1 000 kg. PP8 For UN No. 2002, packagings shall be so constructed that explosion is not possible by reason of increased internal pressure. Cylinders, tubes and pressure drums shall not be used for these substances. PP9 For UN Nos. 3175, 3243 and 3244, packagings shall conform to a design type that has passed a leakproofness test at the packing group II performance level. For UN No. 3175, the leakproofness test is not required when the liquids are fully absorbed in solid material contained in sealed bags. PP11 For UN No. 1309, packing group III, and UN No. 1362, 5H1, 5L1 and 5M1 bags are allowed if they are overpacked in plastic bags and are wrapped in shrink or stretch wrap on pallets. d These packagings shall not be used for substances of packing group I that may become liquid during transport (see 4.1.3.4). e These packagings shall not be used when the substances being transported may become liquid during transport (see 4.1.3.4). Cont'd on next page P002 PACKING INSTRUCTION (SOLIDS) (cont'd) P002 Special packing provisions (cont'd): PP12 For UN Nos. 1361, 2213 and UN No. 3077, 5H1, 5L1 and 5M1 bags are allowed when carried in closed vehicles or containers. PP13 For articles classified under UN No. 2870, only combination packagings meeting the packing group I performance level are authorized. PP14 For UN Nos. 2211, 2698 and 3314, packagings are not required to meet the performance tests in Chapter 6.1. PP15 For UN Nos. 1324 and 2623, packagings shall meet the packing group III performance level. PP20 For UN No. 2217, any siftproof, tearproof receptacle may be used. PP30 For UN No. 2471, paper or fibre inner packagings are not permitted. PP34 For UN No. 2969 (as whole beans), 5H1, 5L1 and 5M1 bags are permitted. PP37 For UN Nos. 2590 and 2212, 5M1 bags are permitted. All bags of any type shall be carried in closed vehicles or containers or be placed in closed rigid overpacks. PP38 For UN No. 1309, packing group II, bags are permitted only in closed vehicles or containers. PP84 For UN No. 1057, rigid outer packagings meeting the packing group II performance level shall be used. The packagings shall be designed and constructed and arranged to prevent movement, inadvertent ignition of the devices or inadvertent release of flammable gas or liquid. NOTE: For waste lighters collected separately see Chapter 3.3, special provision 654. PP92 For UN Nos. 3531 and 3533, packagings shall be designed and constructed to permit the release of gas or vapour to prevent a buildup of pressure that could rupture the packagings in the event of loss of stabilization. Special packing provision specific to RID and ADR: RR5 Notwithstanding special packing provision PP84, only the general provisions of 4.1.1.1, 4.1.1.2 and 4.1.1.5 to 4.1.1.7 need be complied with if the gross mass of the package is not more than 10 kg. NOTE: For waste lighters collected separately see Chapter 3.3, special provision 654.