TETRAFLUOROETHYLENE, STABILIZED
ADR 2025 · Class 2 · carriage of dangerous goods by road
- Class
- 2
- Classif.
- 2F
- Hazard labels
- 2.1
- Transport cat.
- 2 (B/D)
- Class
- 2
- Classification code
- 2F
- Hazard labels
- 2.1
- Limited quantities
- 0
- Excepted quantities
- E0
- Packing instructions
- P200
- Mixed packing
- MP9
- Tank instruction
- (M)
- Tank code
- PxBN(M)
- Vehicle type
- FL
- Hazard number
- 239
- Exemption limit
- 333 kg/L
Special provisions
SP 386
When substances are stabilized by temperature control, the provisions of 2.2.41.1.21, 7.1.7, special provision V8 of Chapter 7.2, special provision S4 of Chapter 8.5 and the requirements of Chapter 9.6 apply. When chemical stabilization is employed, the person offering the packaging, IBC or tank for carriage shall ensure that the level of stabilization is sufficient to prevent the substance in the packaging, IBC or tank from dangerous polymerization at a bulk mean temperature of 50 °C, or, in the case of a portable tank, 45 °C. Where chemical stabilization becomes ineffective at lower temperatures within the anticipated duration of carriage, temperature control is required. In making this determination factors to be taken into consideration include, but are not limited to, the capacity and geometry of the packaging, IBC or tank and the effect of any insulation present, the temperature of the substance when offered for carriage, the duration of the journey and the ambient temperature conditions typically encountered in the journey (considering also the season of year), the effectiveness and other properties of the stabilizer employed, applicable operational controls imposed by regulation (e.g. requirements to protect from sources of heat, including other cargo carried at a temperature above ambient) and any other relevant factors.
SP 662
Cylinders not conforming to the provisions of Chapter 6.2 which are used exclusively on board a ship or aircraft, may be carried for the purpose of filling or inspection and subsequent return, provided the cylinders are designed and constructed in accordance with a standard recognized by the competent authority of the country of approval and all the other relevant requirements of ADR are met including: (a) The cylinders shall be carried with valve protection in conformity with 4.1.6.8; (b) The cylinders shall be marked and labelled in conformity with 5.2.1 and 5.2.2; and (c) All the relevant filling requirements of packing instruction P200 of 4.1.4.1 shall be complied with. The transport document shall include the following statement: "Carriage in accordance with special provision 662".
SP 676
For the carriage of packages containing polymerizing substances the provisions of special provision 386, in conjunction with 7.1.7.3, 7.1.7.4, 5.4.1.1.15 and 5.4.1.2.3.1, need not be applied, when carried for disposal or recycling provided the following conditions are met: (a) Before loading an examination has shown that there is no significant deviation between the outside temperature of the package and the ambient temperature; (b) The carriage is effected within a period of not more than 24 hours from that examination; (c) The packages are protected from direct sunlight and from the impact of other sources of heat (e.g. additional loads that are being carried above ambient temperature) during carriage; (d) The ambient temperatures during the carriage are below 45 °C; (e) Vehicles and containers are adequately ventilated; (f) The substances are packed in packages with a maximum capacity of 1000 litres. In assessing the substances for carriage under the conditions of this special provision, additional measures to prevent dangerous polymerization may be considered, for example the addition of inhibitors.